Craftsman Front Door Makeover Guide: Transform Your Entryway in 5 Easy Steps

1. Introduction

There are many reasons that your entry door may need some attention. Weather and age wear down a door over time. Constant exposure to the sun, particularly near the equator, can shrink wood and cause paint to fade quickly. Rain, snow, and general moisture may damage wood by causing it to swell. Likewise, cold air seeping through a door can also strain it. Furthermore, these weather conditions can break the seal around a door’s glass, making it more susceptible to damage. Are you looking to replace a door? A dull appearance and resistance in the hinges are two signs that a door is reaching the end of its life. A new craftsman front door not only solves these issues, but it adds a refreshing warmth and remarkable curb appeal to a home.

Items Needed to Restore a Front Door. A couple projects come with everything that’s needed to get started. Our Shasta craftsman front door is no exception. Because it’s been pre-hung and comes with finishing products, this door is easy to install. However, a few more items are needed before the final install. If you’re restoring your existing door, make sure you have the following items available: a sawhorse or large work surface and stain or paint. Sandpaper is also required to refinish a wood door. Door hardware, a door handle, and drill were added to the Amelia front door to give it a classic look. Finally, a level, screwdriver, and hammer are required to ensure a proper fit. Once you’ve collected all the necessary items, it’s time to get to work restoring your front door.

Looking for information on how to refinish a front door? You’ve landed on the right page. As the focal point of your home, a lot is riding on your front door. After all, not only does it welcome your guests and family members inside, but it also protects your home against the outdoor elements. If your entryway is in need of a little pick-me-up, our craftsman front door makeover is exactly what you need. In just five simple steps, you and your family can make an immediate upgrade to your home’s entry.

1.1. Importance of a Front Door Makeover

Front doors in craftsman homes have been made of classic wood with rectangular glass sidelights. A sturdy classical style is expressed through geometric, rectilinear elements mostly. This style is one of the elements of the craftsman design. With time, wood gets wear and out of order, needing constant maintenance. Neither type of siding, nor color of the wall, nor nice lighting can balance the harm the front door with aged protective coating does to the entrance area. With a blurred look and worn-out features, it should be renewed thoroughly. That is what a craftsman front door makeover guide is about.

The first impression a visitor gets when approaching your home is the front door. It also gives a brief idea about the household itself. A worn-out, diseased, and damaged door gives a negligent impression. If you know the craftsman style front door makeover guide, which isn’t very difficult, you can fix the front door appearance in 5 easy steps. Transforming your entryway is more budget-friendly than renewing the whole home.

2. Step 1: Assessing Your Front Door

Clean the surface. Finish prepped wood panel and clean the door/sidelights with a damp cloth. While the door is drying, tape off any glass or non-wood thresholds, door edges, etc. Protect any painted areas with masking paper. Tape off threshold inserts. If existing painter’s tape is difficult to remove, reapply tape. Buyer Notice: I also considered using a medium-grit sandpaper initially, but I decided to skip this step for the sake of time. If you choose to sand your new wood door, use a 220-grit sandpaper to protect the finish. Always lightly wipe down your door before priming or painting. Optional: Apply caulk around sidelights and thresholds.

Remove the door (optional) and hardware. If you’re planning on painting your craftsman door instead of refinishing, go ahead and unscrew and remove your handle now. Lie the door on a protected, flat surface. Apply Liquid Sander to remove existing door and glass stain or primer. For a new wood door (without primer) that’s never been finished, proceed to steps 2 + 3. We’ll be painting our door and the inside edge of the glass panel.

Is your front door showing its age? Do you need to make a crafting entryway transformation? We have the solution! Get it ready to greet visitors and welcome you and your family home. Follow these easy steps about how to transform your new craftsman front door in a single weekend. If painting glass, follow the above system for non-glass sections, avoiding drips and streaking. After painting, wipe away any drips with a damp cloth. Repeat steps for additional paint coats.

2.1. Checking for Damage or Wear

If your door has intense wear, your main concern should be related to the door structure. At the bottom, where it receives a greater load when opened or closed, if it is damaged, you should replace the entire unit because despite the reinforcement, it will no longer provide the required security. The finish, such as fine glass, paints, etc., can be done after that. Whether your door has a glass finish or not, the glass will be added later. That way you can focus on the structure/reinforcement that the project requires first. Even though you might not like the idea of spending more on rebuilding your door, one thing you should consider. A poorly reinforced or insecure door can become the target of a break-in, which will cost you and your loved ones your peace of mind and even other things that are valuable to you. What are the methods of repairing a door? Before doing the repair, a good cleaning with a damp cloth and neutral detergent is essential to remove dirt, grease, and dust because any grease or residue the adhesive/sealant won’t stick if the door is worn and can make the problem even worse.

The first thing you should do is to check the condition of your front door, especially its frame. As it’s your house’s main entrance, it’s exposed to the outside elements, insects, and pests, which may leave the wood’s material ate and damaged. So your first task must be to investigate in every corner whether it has signs of rot or damage. If you find some, there’s no problem. Just grab the plywood and cut a piece that will completely cover the affected area. In the trunk or two solid wood, cut the damaged part and then screw the cut piece of plywood and finally repaint everything. This procedure avoids a bigger problem.

2.2. Evaluating the Style and Design

You can see the difference in the design of the house in the image above. Notice the original door with its very small window above where we could hardly see out. That’s the aesthetics and eye-pleasing part of the door. Then the majority of these homes feature such traditional 15-light transom lights. The window panes are everywhere, that were too numerous to count. Yeah, we were a bit surprised, and we were shocked when we compared the ways these various window transom lights. We slowly realized that we’re so sick of seeing the grids! We don’t want any window grids inside our transom windows. Also, the homeowners in my neighborhood agreed with me because there were other similar homes that have doors without all the small window panes and grids. So we decided to get away from the traditional look. Using the matching grid breakout pattern was our primary goal when we replaced our storm door. We didn’t want to bring any more attention to the upstairs grid of the transom window sections.

We quickly discovered that the building professionals must not necessarily think about the beauty of a window or door. However, it was a top priority for us. That’s when we started paying attention and looked at all the design elements. Besides functionality and efficiency, we were pleased with knowing the range of optional reading of grids, color options, hardware, and other distinctive glass panel options. It made it easy to find a quality, beautiful, and matching front door. When we saw an example of their Craftsman door, we knew that it would be the perfect option for our home! The paint color we already had in mind was called “Dovetail by Sherwin Williams”, and the exact door we liked was finished in the nearly busted color.

3. Step 2: Preparing the Door for Makeover

Carefully remove the door from the frame by unscrewing its hinges. Take the time to cover one corner of each hinge, using a piece of tape, to make it easier to reposition them on the door later. The door is likely to be painted in various colors. Scrape and sand the bright sides of the ends before dealing with the long panels. Perform final sanding on the edges, considering their square and level intersection with the door. To ensure a longer lifespan of your finish, make sure the edges at the top and bottom aren’t breaking down. In addition, fix softwood problems, such as weeping knots or fingers. If the crack is larger than 1/4″ and/or allows light to pass through, use a two-part filler. Mix both parts in equal amounts, whistling until you get a consistent color. Remove the excess with a hard spatula and a damp cloth. Let it dry according to the manufacturer’s instructions. Sand until the crack is flat and level with the door’s surface. Repeat the process if necessary.

Once the tools, materials, and workspace are ready, it’s time to prepare the door for a makeover. This step requires removing paint, sanding, and patching every imperfection. Beforehand, make sure the door’s top and bottom edges get special attention to prevent water infiltration. To avoid tempting fate (and expenses), check the door for damages and its surroundings for possible repairs. Remember that there’s no point in having a new door if its frame is due anyway.

3.1. Cleaning and Removing Hardware

The owner’s manual was the only thing that was hanging on the door right back to the storms. Its threshold, installed after our transfer, must have been in full swing for over a year, which is saying something. I want to finally work on painting the front door, but first things first, I had to drop the threshold to have a look at the condition of the door before repainting. I first saw that the threshold was more than half an inch above the wood door. Then I noticed these white marks on the door right beneath the threshold and knew immediately what they must be. Those marks were damp stains. Condensation can find its way inside if a threshold installed after a transfer and/or is not correctly sealed.

Cleaning and Removing Hardware: Your first step is to clean the door and get prepped for painting. As you can see, it’s mega gross. This was a few years of use based on the dirt and dust trapped near the top of the door frame. So now that we have it all apart, it’s time to clean it well and prep for our paint. I used some dish soap and warm water to wash the door and then sprayed it with a hose. Once it’s all clean, you need to make sure you don’t have any paint or old varnish on the door. Use a paint scraper to remove old paint gunk. I also used one of those wire bristle barbecue grill brushes on parts of the door that had some old clear coat. I also changed from a foam roller to a paintbrush. I just found that the brush was getting into all these nooks and crannies better. I did one more quick wipe down once I was finished scraping and sanding it.

3.2. Sanding and Repairing Any Imperfections

I like to lay backer rod into large gaps and holes that need to be repaired. Typically, caulking is recommended for gap filling, but I tend to shy away from using caulk exclusively because it doesn’t allow for the same flexibility offered by backer rod. Backer rod does not have adhesive properties, and it’s resistant to insects and water, which makes it a great choice for use on a front door. For smaller dings and holes, use a wood filler or putty and apply directly, or use wood glue to fill the large holes and some dings. Sanders can come in handy when restoring and refinishing doors. Carefully fill dings with wood filler or glue using a putty knife or spatula and smooth the repairs with a flexible sanding block. Get width of multiple areas on our door can be perfect now.

Sand each side, top, and bottom of your door with 320 grit sandpaper. Don’t waste your time with lower grit paper because it’s more likely to leave scratches and lines in the door that will need to be removed later with 320 or 400 grit paper. Use a vacuum and/or microfiber towel to remove any residual sanding dust on all areas of the door. It’s really important to have a perfectly dust-free work area because the paint will not adhere properly to areas with leftover dust, and you may have adhesion problems with your finish. If you have a solid front door, check for holes, dings, gaps, and areas that need to be filled with wood putty. Smaller holes and dings might only require a quick fill, while larger holes and gaps can be repaired using backer rod (used in caulking) for an inconspicuous and flexible fix.

4. Step 3: Choosing the Right Paint or Stain

That being said, there are some great new products on the market that are both safe and environmentally friendly when stripping stain or paint. While this may not necessarily accelerate the process of removing the door’s existing finish, these safer products will allow you to avoid working with harsh chemicals. Not only is this better for you, but it is also better for the environment as well. After your door is stripped and the original finish is removed, sand any areas that are rough to the touch on your door as well as any areas that may have experienced slight discoloration. It will be much easier to sand your door in the current off-the-hinges state, as you won’t need to be as concerned about accidentally damaging your frame or walls. Using a moderate to a coarse grit, sandpaper will ensure the removal of rough patches and enhance adhesion. Always sand with the grain.

Whether you choose to paint your front door or stain it, you will need to begin by removing the existing color from the door itself. A heavy-duty paint remover or stripper will eliminate the existing color. You will have to apply it to the surface, typically allowing the product to sit and break down the layers of stain. Stripping stain or paint is a time-consuming and messy process. Technically, the process is simple: apply the product, wait for it to break down the color, and then remove the color and product from the surface. In reality, this process takes time, requires significant effort, involves multiple applications, and will leave you contending with a considerable mess. It takes both patience and elbow grease to successfully strip paint or stain.

4.1. Considering the Overall Aesthetic

Panel Styles: There are 3 distinct styles for Craftsman doors: (1) a Single Panel, often made of Douglas Fir with glass elements in a vertical or horizontal orientation and enhanced with mulling and/or brace supports; (2) a single-panel design, still created with Fir wood but enhanced through etched or insulated glass; and (3) a single-panel, 8-panel door. More detailed descriptions of those options are provided in the following section, for clearer identification of the door even-handed you have in mind. Fitting your home with a specific door style is a matter of not just matching the doorway graphite but should be a more important stylistic selection to overt attention to your front door when someone gazes at your home.

Selecting the right Craftsman front door style for your home is arguably the most important aspect of the makeover process. Not only are there different panel styles, glass types, and panel/lite/panel layouts to choose from, but Craftsman front doors further distinguish themselves with different sticking types, panel textures, and insights. To provide a quick foundation for the other aesthetic choices you’ll need to make as part of your renovation journey, our experts at ETO Doors put together a quick guide about the available door panel configurations, so you can find a door that signifies authentic Craftsman exterior design.

4.2. Selecting the Appropriate Finish

If price is the most important criterion for you, the next best thing to Osmo is a combination of a stain and topcoat. A variety of renowned brands offer great products just like Minwax, Cabot, or Varathane. A little goes a long way with these brands and they are readily available in your local home improvement store. Select your stain or topcoat based on its compatibility and compatibility properties. A topcoat is like a sealant. It provides your door with the necessary weather protection and durable finish. Varathane offers a golden oak option – perfect for those of you going for the classic craftsman look of a wood-grain finished door. The protective coat provides 3-4 hours of dry time between coats. Make sure to sand between each layer for high-gloss finishes. This can add several unnecessary steps if you blast through the layers and accidentally cut the stain layer.

If your finish is on the door’s exterior, make sure you select a product designed for exterior use. There are also interior only finishes, as well as products catering to both conditions. While it may be tempting to save a few dollars, don’t try and use a can of interior Poly to finish your entryway. A finish designed for exterior applications will require less maintenance. Many manufacturers and artisans are now using a product called Osmo, a finish made in Germany. Osmo is extremely popular for interior wood finishes due to its non-toxic, low odor, natural ingredients and child and pet safety qualities. Yes, it’s even suitable for toys. The only downside to Osmo is the price. A quart of Polyshades during a Lowe’s sale is about $11.00, while the quart of Osmo is north of $40.00. This figure only increases when used in combination with Osmo’s other products like bristles and brushes. Also, when post-finish care is necessary, Osmo requires removing the existing wax before lightly sanding down the scratched or damaged areas. Once this step is accomplished, you must clean the door. Finally, you can reapply the finish. Woodcraft carries Osmo products, as well as a variety of other finishes and supplies.

4.3. Exploring Color Options

Your door color can make a huge impact pretty quickly, so don’t worry too much about choosing the wrong color. Just choose the one that makes you happy! When it’s time to refresh your exterior trim paint, you may choose to have the original color matched for the freshening up process.

So take your time and choose a color that makes you happy – that’s the most important thing! If you go with a pop color for your door, choose a more traditional color for trim paint to balance it out and let it shine. Utility doors, such as garage doors and side doors, benefit from being the neutral color. And we won’t leave you scrambling to choose a main door color on your own – here are our favorite picks from the offered color options from Home Depot with the same brand/finish that our front door was painted with.

You’ve decided that painting your door is the right move, and that’s great news! Fresh color is a powerful tool for homeowners. It’s an inexpensive way to increase the perceived value of your home, and it sets the tone before anyone even gets inside. Door paint also has a functional advantage, because continuous sun exposure can cause splitting and cracking in wood doors. Paint and sealer protect wood from UV damage and help prevent wood rot.

5. Step 4: Applying the Paint or Stain

The garage is the perfect place for laying down a painted door since all dust, bugs, and tree leaves stayed outside. The same goes for any exterior door project. When the door is dry, remove the blue tape. Be very careful because if the tape pulls off any paint, the woodwork needs to be sanded and touched up. Once the door is fully painted on both sides, you are ready to rehang the door. Be sure to use new or cleaned hinge screws, just like when you removed the door. If you’re in a high humidity area, I do not recommend rehanging in the morning because condensation can form between the door and frame, causing the newly painted door to stick. Be sure to dry it thoroughly before hanging the door back up. The final step is to reinstall the old doorknob or install a new one.

No matter how you choose to paint or stain your Craftsman front door, there are several steps you should follow to ensure success. First, and the most important step in painting, you must prep the door. Sand, prime, and sand again. This takes a long time, but is worth every minute. If you miss any of the sanding or primer steps, the paint can peel and you’ll have to start over. If you are painting the raised rectangles and edges of the door frames, paint them first. Then paint the vertical and horizontal pieces of the door frame. Next, go on to the outer vertical pieces that fall against the glass. Then the spaces between the 2×4’s. Finally, finish the flat surfaces, starting with the back of the door, followed by the front, and ending with the top. I painted my door first in the summer, but didn’t finish it until several weeks later. This wasn’t a good idea. Painting the sun side was harder to paint because the sun was hot and drying the paint quickly, making it thicker. The other two days were cooler and the paint had more time to self-level.

5.1. Proper Techniques for a Smooth Finish

Whether you are getting your door ready for new paint, fresh stain, or just for general maintenance, you want to make sure you do this properly. You’ll never get a totally smooth finish if you have even the tiniest chip of paint left. Weatherstripping and condensation can cause an old wood door to rot and deteriorate. Here are some expert techniques for wood door maintenance. Use two-part wood bleach (liquid or powder) on stains caused by rot or water damage. Paintable solid-core, medium-density fiberboard doors are better suited to humid climates than solid wood. Coat the bottom edge with urethane to prevent peeling.

Prep your front door for a fresh coat of paint with these door-painting techniques. There seems to be a lot to consider when it comes to painting your front door, and I have no idea why, of all things, it has taken me eight years to actually get around to it! My tendency to procrastinate means that when I finally did get to it, I was in over my head. I was way too close to my deadline to take my time or do things perfectly.

5.2. Tips for Avoiding Common Mistakes

Handcrafted details are what will make your new entry pop! It’s time to replace that basic builder front door with a Craftsman door full of character. This simple 5 step entry door update will make a lasting impression and add immense curb appeal. This homeowner’s original front door was really showing its age. An eclectic jumble of faux stone and traditional siding didn’t really define his 1925 house either, and the entry felt clunky and uninviting. Even though the door frame was still in good shape, we decided to go ahead and replace that too so the whole new door unit would look clean and fresh. The extra prep work paid off. Our homeowner swapped out his off-the-shelf, builder basic front door for a craftsman styled door that he painted in a punchy red. I really love the color he chose! To add even more curb appeal, our homeowner added a wide trim casing around the door, eliminating the outdated shutters, and a large welcoming festoon-style door angel.

Front door installation tips: If there’s one place where you don’t want to skimp on quality, it’s with the installation of a brand new door in a brand new jamb. Have a skilled and experienced installer inspect the job throughout the process to make sure it is done properly and any problems are resolved immediately. Every detail matters, from shimming the deadbolt strike plate as noted earlier, to measuring the gap along the top jamb, and from installing the trim piece strips to planing and sanding the door for a perfect fit on all sides. If the threshold and all the pieces aren’t carefully fit and installed, you could be looking at moisture problems, overwhelming wear, warping, and higher energy bills as air infiltrates the cracks and around the slab and jamb.

6. Step 5: Adding Finishing Touches

Cut and paint the 1 x 10 rectangle piece. Fit the rectangle molding inside and nail to secure. Caulk between both pieces. Since no miter is visible, I just put the bottom piece back in, so now the door trim was intact. I took the 2 pieces outside and laid them in the grass, and painted 2 coats of exterior white. Note: there were zero bugs or dust storms. I think this project was put under a magic spell because nothing happened for once. To install, I had to use our steel nibbler to cut the trim into a custom shape to fit inside the glass border. Note: all the rectangles on my prehung door were the same size, so we just used the same miter saw setting for each piece. Be sure to measure so you match the dimensions of your own door rectangles. I nailed it in the cut, added outdoor caulking to the seams, and installed the glass back in to hold the board in place.

Painting: You can see the roughed up and tired state of our original door from this before/after picture. It is well-loved, but I think the 30 bloody handprints in the space of 5 inches of border and 30 inches of glass are a bit much. It’s also important to note that I had to paint it with latex paint, as I was nursing at the time and did not want to use the biohazard known as oil-based paint anywhere near my newborn.

6.1. Enhancing with Decorative Hardware

Accents featured in Arts & Crafts entered house décor to reflect the Craftsman family’s lifestyle. Popular pieces include fine craftsmanship lamps, which today remain attention-grabbing accents. Arts & Crafts decorative elements are strong as long as appealing solutions in the display, such as wood grilles, are combined with Craftsman decorative pieces in a balanced dialogue. The floral and botanical elements used as decorative relief sculpture shapes permeated with modern practical air prevailing the entire display. The browns and dingy colors represent a palette’s artistic preference, which sets an excellent base for an elegant Victorian drawing-room look.

Craftsman front doors draw attention to base, frieze, and cornice that juxtapose the main high, well-balanced, and symmetrical-looking “box construction” volume. Online decoration elements can facilitate the search for the appropriate architectural detailing featuring Craftsman style house front doors. Working with local art woodworkers can be a winning strategy that will undoubtedly achieve the desired detailing results. Pieces with pockets of stationary components and movable mechanisms are particularly suited to assure precise detailing on all Craftsman decorative elements seen articulating the style’s historical value.

Often constructed on a stone or brick base – commonly found in the American Midwest – Craftsman style house front doors required a discreet anchoring to the wall, featuring large wooden porch pillars and – in Georgian and Colonial-style versions – stucco details. Evaluation of these structural features is paramount to assure maintenance or renovation over time in full respect of the original character. Even if elements of decorative hardware are utilized, the handle or the knob was frequently adapted to personal styles and finishes. If the house reflects a more formal structural shape, as for symmetrical Georgian mansions, the board and batten Craftsman style door can feature classic or reflecting patterns for an additional elegant touch.

Designed for 20th-century aesthetic tastes, the quintessentially American Craftsman style features fine examples throughout the country. Original Arts and Crafts doors were built to last, and many numerous homes still express their genuine character with solid hand-crafted wooden doors. Detailing often featured in Craftsman front doors was simpler, with 2, 3, and in the most luxurious cases, even 5 panels. Forgetting about dramatic decorative and protective treatments, Craftsman front doors have an aesthetic appeal based on quality craftsmanship, skillful, precise hand-working, cutting, and assembling. Build up sash squares, casings, pillars smartly articulate intricate detailing and play with overhanging eaves adorned with decorative motifs.

Enhanced with decorative hardware, a Craftsman front door exudes an air of timelessness for a welcoming entry. Because it combines a few different styles, decorative hardware is perfectly paired with Craftsman design. Bronze or black finishes provide an elegant touch with the same patina as oil-rubbed bronze, bringing character to Craftsman houses. Muted hardware finishes also elevate the appearance of modern doors. These tips examine the most common types of decorative hardware, including handlesets and doorknockers. Learn how to pick out the best pieces based on the door style and finish your front door makeover.

6.2. Styling with Plants and Accessories

Plants and flowers are the easiest way to add personality and curb appeal to your home. For an elegant and classic look, such as deep greens and rich purples, we prefer easy-to-maintain but beautiful flowers. This will instantly thrill visitors with a mother’s warm welcome. Brightly colored perennials instantly cheer up the worn-out landscaping around your home. Colors can inspire a year-round, ever-changing look. They are the family-friendly way to change up your home’s looks for each season. If you’re like us, you probably adore the phrase curb appeal. Spruce up your home’s first step with statement-making house numbers that encompass your home’s style — and invest.

Choosing the perfect final touch for your new front door can seem like a daunting task. You have so many options, from flowers to innovative door knockers and everything in between. That is why we offer a wide selection of exterior accessories. To get you started, talk to one of our door designers. For an over-the-top, luxurious vibe, think about the shape and material of your new door. Using lots of organic materials in pots for front porch plants, from potted evergreens to giant ferns and palm trees, will make your entryway grand and welcoming. This will give your home a cohesive, welcoming vibe.

7. Conclusion

The Handyman here is one of the broader online DIY communities in the country. The aim of the DIY community is to promote the idea of people independently changing their living space to achieve the home they desire. Fifty years ago, your front door might have much in common with the other doors in your neighborhood. But today, front door colors stand out among the increasing number of high-value homes in America, sometimes standing out on the block with their color. After several major renovations have been left in our homes, big and small, we have finally turned our attention to the front door. This front door makeover idea was an easy project for two days of vacation and a few days of preparation, but the severe drowsiness made all the difference in the appearance of our home. And the brilliant blue color was a personal way to complete the front door makeover!

Beautiful entry by the new Certa Pro Front Door professional! As you can see, we have the color jump with fun yellow and fantastic accessories to boot. The soft white wall next to Bowden Gray is a dream that draws everyone’s attention to the new door. So to start the next time you are looking for a “front door makeover near me” – team Certa Pro! But like many homeowners, one factor has always stopped me. “My entry door wasn’t that bad, I could say. “Maybe it could use a little color, but we have so many more important things to worry about. Long story short, and a son later, and our entry door is still the same dingy, cream front door that the builders pulled out of the box in the early 2000s.

Absolutely ecstatic to unveil marvels? Step inside and discover what truly sets us apart!

Curious About Craftsman Front Doors? Here Are the Top FAQs Answered!

References:

Tarajko‐Kowalska, J. ““Rhapsody in blue”—the blue color in architecture and the built environment: traditions and contemporary applications.” Color Research & Application, 2023. [HTML]

Korver-Glenn, E. “Race brokers: Housing markets and segregation in 21st century urban America.” 2021. [HTML]

Hammond, Janice H., A. Kamau Massey, and Mayra A. Garza. “African American Inequality in the United States.” Harvard Business School Publishing (2020). utsouthwestern.edu

De Boeck, S. and Ryckewaert, M. “The preservation of productive activities in Brussels: The interplay between zoning and industrial gentrification.” Urban Planning, 2020. cogitatiopress.com

Taylor, Zac J., and Manuel B. Aalbers. “Climate gentrification: risk, rent, and restructuring in Greater Miami.” Annals of the American Association of Geographers 112.6 (2022): 1685-1701. tandfonline.com

Kim, J. Y. and Kim, Y. O. “… behavior and interaction according to the spatial configuration of a social housing complex: A comparison between High-Rise apartments and perimeter block housing.” Sustainability, 2022. mdpi.com

Dupont, Dawa, Qianmeng Zhu, and Sam J. Gilbert. “Value-based routing of delayed intentions into brain-based versus external memory stores.” Journal of Experimental Psychology: General 152.1 (2023): 175. ucl.ac.uk

Ruiz, Agustin P., Rolando Schimpf, and Rolando H. Martínez. “Fine wood, architectural components, and furniture from Prosopis.” Prosopis as a Heat Tolerant Nitrogen Fixing Desert Food Legume. Academic Press, 2022. 199-212. [HTML]

Neal, Michael, et al. “Why Do Households of Color Own Only a Quarter of the Nation’s Housing Wealth When They Compose a Third of the Nation’s Households.” Report, Urban Institute, Washington, DC (2021). urban.org

Sönmez, S. and Arslan, S. “Investigation of the effects on ink colour of lacquer coating applied to the printed substrate in the electrophotographic printing system.” Polish Journal of Chemical Technology, 2021. sciendo.com

No tags for this post.

Related Posts:

Share:

Facebook
Twitter
LinkedIn

SHARE THIS POST:

Don’t want to deal with high-pressure sales and misleading pricing games?

Neither do we! Call or email us for a different way to get a beautiful new front entry door.

ScHEDULE A QUOTE